General and Operation Overview
Developer Housing Assembly (Development)
Dispense Motor
Assemblies
Trickle Motor
The Developer Housing Assembly contains toner and a small amount of Carrier. The Developer
Housing Assembly also comes installed with a CRUM, which is a non-volatile memory that stores
consumable data.
Dispense Motor Assembly - Drives the Paddle in the Toner Cartridge and the Auger in the
•
Transport section to supply toner from the Toner Cartridge to the Developer Housing Assembly.
One is allocated to each color (Yellow, Magenta, Cyan, and Black).
•
Trickle Motor (Waste Auger Assembly) - Drives the Auger to transport the used toner that is
ejected from the Developer Housing Assembly into the Imaging Unit Waste Toner Container in the
(K) Imaging Unit Assembly.
•
Developer Housing Assembly (Y/ M/ C/ K) - The Housing Developer Assembly is made up of the
following main components:
–
Magnet Roller - Contacts the Drum and forms toner images on the Drum.
–
Auger - Agitates the toner.
–
Trimmer - Evens out the layer of toner and carrier on the Magnet Roller.
1-56
Phaser 7100 Service Manual
Toner Cartridges (Y, M, C, K)
Magnet Roller
Auger
Developer Housing
Assemblies (Y, M, C, K)
Trimmer
s7100-172
Xerox Internal Use Only