116-710 Hp-Gl/2 Memory Overflow; 116-711 Plw Size/ Orientation Mismatch - Xerox Phaser 7100 Service Manual

Error Troubleshooting

116-710 HP-GL/2 Memory Overflow

HP-GL/2 memory overflows.
Applicable Fault Code
• 116-710: HP-GL Spool File Overflow
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
Troubleshooting Procedure
Step Actions and Questions
1. Increase the HP-GL spool size.
Or, install the HDD.

116-711 PLW Size/ Orientation Mismatch

Form Overlay is impossible because the size/ orientation of the PLW form's drawing is different from
that of the paper.
Applicable Fault Code
• 116-711: <PLW form synthesis error> Form Overlay is impossible because the size/orientation of
the PLW form's drawing is different from that of the paper.
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
Troubleshooting Procedure
Step Actions and Questions
1. Select paper that has the same size and orientation as the registered form.
2-360 Phaser 7100 Service Manual
.
.
Xerox Internal Use Only