Rep 15.25 Retard Holder Assembly - Xerox Phaser 7100 Service Manual

REP 15.25 Retard Holder Assembly

PL 15.3.15
1. Remove Tray 2/ 3/ 4.
2. Remove 2 screws (silver, tapped, 8 mm) that secure the Retard Chute (PL 15.3.21).
3. Release the left and right hook and open the Retard Chute.
Note: When performing the next step, do not drop or lose the Retard Spring (PL 15.3.16) that is
attached to the Retard Holder Assembly.
4. Slightly release the hook on the right side of the Retard Holder Assembly outward and rotate the
Retard Holder Assembly 90°.
5. Open the hook on the right side of the Retard Holder Assembly outward and free the hole of the
Retard Holder Assembly from the boss that is attached to the hook to remove it.
Xerox Internal Use Only
Service Parts Disassembly
s7100-334
Phaser 7100 Service Manual 4-289