Rep 8.3 Waste Auger Assembly (Trickle Guide Assembly) - Xerox Phaser 7100 Service Manual

Service Parts Disassembly

REP 8.3 Waste Auger Assembly (Trickle Guide Assembly)

PL 8.1.10
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
Note: For additional tips, refer to the
Phaser 7100 Training materials).
1. Remove the Imaging Unit (Y/ M/ C/ K)
2. Remove Tray 1.
3. Remove the I/P PWB Cover Assembly
page 4-19).
4. Remove the Rear Cover
5. Remove the Right Side Cover
6. Remove the Left Side Cover
7. Remove the Right Feeder Cover
8. Remove the Cam Cover
9. Remove the IBT Retract Cam Assembly
10. Remove the Right Imaging Unit Guide Assembly
page 4-123).
11. Remove the Left Imaging Unit Guide Assembly
page 4-129).
12. Remove the Developer Housing Assembly (Y/ M/ C/ K)
M/ C/ K) on page 4-137).
13. Remove the Laser Unit
Spring Assembly/ Left Rear Spring Assembly
14. Remove the LVPS Fan Assembly
4-144 Phaser 7100 Service Manual
Waste Auger Assembly Removal video
(REP 6.0 Imaging Unit (Y/ M/ C/ K)
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
(REP 1.11 Right Side Cover
(REP 1.10 Left Side Cover
(REP 2.3 Right Feeder Cover
(REP 9.7 Cam Cover on page 4-170).
(REP 9.6 IBT Retract Cam Assembly
(REP 7.1 ROS Assembly (Laser Unit)/ Front Spring Assembly/ Right Rear
on page 4-130).
(REP 12.16 LVPS Fan Assembly
on page 4-27).
on page 4-25).
on page 4-40).
(REP 6.1 Right Imaging Unit Guide Assembly
(REP 6.5 Left Imaging Unit Guide Assembly
(REP 8.1 Developer Housing Assembly (Y/
on page 4-226).
(also available in the
on page 4-121).
on
on page 4-168).
on
on
Xerox Internal Use Only