Rep 2.2 Right Turn Gear Assembly - Xerox Phaser 7100 Service Manual

REP 2.2 Right Turn Gear Assembly

PL 2.1.2
1. Remove Tray 1.
2. Remove the Bypass Tray Frame Assembly
3. Remove the I/P PWB Cover Assembly
4. Remove the Rear Cover
5. Remove the Right Side Cover
6. Remove the Right Feeder Cover
7. Remove the Protect Cover Assembly
8. Remove the Right Turn Bracket Assembly
9. Remove the KL clip that secures the Right Turn Gear (PL 2.1.2).
10. Remove the Right Turn Gear.
11. Disconnect the 2 Feeder Assembly wiring harness connectors P/J4521 and P/J4522.
Xerox Internal Use Only
(REP 3.1 Bypass Tray Frame Assembly
(REP 1.5 Image Processor (I/P) PWB Cover
(REP 1.6 Rear Cover on page 4-20).
(REP 1.11 Right Side Cover
(REP 2.3 Right Feeder Cover
(REP 2.7 Protect Cover Assembly
(REP 2.4 Right Turn Bracket Assembly
Service Parts Disassembly
on page 4-27).
on page 4-40).
on page 4-44).
P/J4522
P/J4521
Phaser 7100 Service Manual
on page 4-69).
Assembly).
on page 4-41).
s7100-057
4-39