REP 15.11 Paper Jam Sensor
PL 15.2.3
1.
Remove the 550 Left Feeder Cover
2.
Remove the Turn Chute Assembly
3.
Remove one screw (silver, 12 mm) that secures the Paper Jam Sensor and remove the Sensor.
4.
Disconnect the wiring harness connector P/J122 that is connected to the Paper Jam Sensor to
remove the Sensor.
Xerox Internal Use Only
(REP 15.8 550 Left Feeder Cover
(REP 15.10 Turn Chute Assembly
P/J122
Service Parts Disassembly
on page 4-268).
on page 4-270).
Phaser 7100 Service Manual 4-271
s7100-241