6.4.11 Developer Drive Assembly (PL 9.1.8)
1.
Remove the rear cover. (6.4.3)
2.
Remove the main board. (6.4.7b)
3.
Remove 5 screws securing the main board bracket.
Left, 2 EA 3*6 machine screw, gold
Top Right, 2 EA 3*10 silver
Bottom, 1 EA 4*10 silver
Note
The black harness guide will fall off.
4.
Remove the ground harness and the harness guide bracket by removing 3 screws.
Top, 2 EA 3*6 machine screw, gold
Bottom, 1 EA 4*10 silver
Guide Harness Bracket
Screw
3 x 6 Gold
Main Board Bracket
Screw
Screw
Screw
Screw
Screw
4 x 10 White
Disassembly
Harness Guide
Screw
3x 10 White
Screw
Screw
4x 10 White
Service Manual 6-29