Consumables And Long Life Maintenance Display Messages; Consumables Life Display Message; Long Life Maintenance Display Message - Xerox Phaser 7100 Service Manual

General and Operation Overview
Consumables and Long Life Maintenance
Display Messages

Consumables Life Display Message

The consumables life span is detected at four stages: Pre Near, Near, Life End, and Dead Stop.
Consumables Life Display Message
Status Imaging Unit
Pre Near Ready to print
Order Imaging Unit: X*1
Near Ready to print
Replace Imaging Unit: X*1
Life End Ready to print
Replace Imaging Unit: X*1
Dead Stop Replace Imaging Unit: X*1
1. X can be Y, M, C, or K.
2. X can be Yellow (Y), Magenta (M), Cyan (C), or Black (K), or a combination of these letters.
Although there are 2 Life End messages for the Imaging Unit, the message (Ready to print - Replace
Imaging Unit) is the one displayed when (Drum Life End) is set to (Continue to Print). However, when
Dead Stop is reached in this case, the message will change to (Replace Imaging Unit X) and the
printing will stop. The displayed message for the Toner Cartridge will be different depending on the
print settings such as FC/ BW, etc.

Long Life Maintenance Display Message

The Long Life Maintenance life span is detected in three stages: Near, Life End, and Dead Stop.
Long Life Maintenance Display Message
Status
Near
Life End
Dead Stop
*1. XXX_XXX indicates the Error Code of the applicable parts (refer to
page 2-21 in Chapter 2).
1-30 Phaser 7100 Service Manual
Fuser Unit
Ready to print
Replace the Fuser Unit soon
Ready to print
Replace the Fuser Unit
Replace the Fuser Unit
Toner Cartridge
Ready to print
Order Toner Cartridge: X*2
Replace Toner Cartridge
Others
Ready to print
Replace XXX_XXX *1
Ready to print
Replace XXX_XXX *1
Unable to print XXX_XXX *1
HFSI Counter Chain-Link Number List
Waste Toner
Ready to print
Order Waste Toner
Ready to print
Replace Waste Toner soon
Replace Waste Toner
Xerox Internal Use Only
on