Rep 12.11 Front Cover Interlock Switch Assembly - Xerox Phaser 7100 Service Manual

Service Parts Disassembly

REP 12.11 Front Cover Interlock Switch Assembly

PL 12.2.8
CAUTION: Do not touch the IBT Belt surface.
1. Remove the IBT Unit
2. Remove the Top Cover Assembly
3. Disconnect the wiring harness connector P/J5226 that is connected to the Interlock Switch
Assembly.
4. Remove one screw that secures the Front Cover Interlock Switch Assembly to the Top Frame Sub
Assembly (PL 13.1.7) and remove the Interlock Switch Assembly.
4-218 Phaser 7100 Service Manual
(REP 9.10 IBT Unit on page 4-177).
(REP 1.1 Top Cover Assembly
P/J5226
on page 4-9).
Xerox Internal Use Only
s7100-391