Remote Download File Checksum Error; Can't Detect Paper Size Of Specified Tray - Xerox Phaser 7100 Service Manual

Remote Download File Checksum Error

The checksum of the Remote Download file that is notified from the EP Center and the checksum of
the file that was actually downloaded are mismatched.
Applicable Fault Code
• 026-725: Remote Download File Checksum Error
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Troubleshooting Procedure
Step Actions and Questions
1. The checksum value that is registered in the EP Center and the checksum of the file that is stored in
the SW repository must be checked for matching. Contact the Support Department to request for
instructions.

Can't Detect Paper Size of Specified Tray

Paper Size of specified tray is unknown.
Applicable Fault Code
• 026-730: Paper Size of Specified Tray is Unknown
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure.
Troubleshooting Procedure
Step Actions and Questions
1. Check the position of the Guides in the Tray that was specified for the print Job and then try again.
2. Check the position of the Paper Size Switch.
Xerox Internal Use Only
Error Troubleshooting
Phaser 7100 Service Manual 2-211