Rep 6.1 Right Imaging Unit Guide Assembly - Xerox Phaser 7100 Service Manual

REP 6.1 Right Imaging Unit Guide Assembly

PL 6.1.5
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
1. Remove the Imaging Unit (Y/ M/ C/ K)
2. Remove Tray 1.
3. Remove the I/P PWB Cover Assembly
page 4-19).
4. Remove the Rear Cover
5. Remove the Right Side Cover
6. Remove the Right Feeder Cover
7. Release the wiring harness from the Harness Guide.
8. Disconnect the wiring harness connectors P/J4521 and P/J4551 that are connected to the Right
Imaging Unit Guide Assembly.
9. Remove 3 screws (silver, 6mm) that secure the Right Imaging Unit Guide Assembly to the printer.
10. Remove the Right Imaging Unit Guide Assembly.
Xerox Internal Use Only
(REP 6.0 Imaging Unit (Y/ M/ C/ K)
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
(REP 1.11 Right Side Cover
(REP 2.3 Right Feeder Cover
on page 4-27).
on page 4-40).
Harness Guide
Phaser 7100 Service Manual 4-123
Service Parts Disassembly
on page 4-121).
on
P/J4521
P/J4551
s7100-126