Rep 9.2 Ibt Belt Cleaner Cover Assembly - Xerox Phaser 7100 Service Manual

Service Parts Disassembly

REP 9.2 IBT Belt Cleaner Cover Assembly

PL 9.1.3
CAUTION: Do not touch the IBT Belt surface. Carefully place the IBT Unit on a flat surface that is
free of any contamination, or dust, etc. with the Waste Cartridge Assembly facing up.
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
1. Remove the Toner Cartridge Cover Assembly
page 4-24).
2. Release latch A and open the Front Frame Assembly (PL 4.1.6).
3. Release latch C and open the Top Cover Assembly (PL 1.1.1) together with the Toner Cartridge
Cover Assembly (PL 1.12).
4. Remove the Imaging Unit (Y/ M/ C/ K)
4-160 Phaser 7100 Service Manual
(REP 1.9 Toner Cartridge Cover Assembly
(REP 6.0 Imaging Unit (Y/ M/ C/ K)
on
s7100-251
on page 4-121).
Xerox Internal Use Only