Covers; Rep 1.1 Top Cover Assembly - Xerox Phaser 7100 Service Manual

Covers

REP 1.1 Top Cover Assembly

PL 1.1.1
CAUTION: Do not touch the IBT Belt surface. Carefully place the IBT Unit on a flat surface that is
free of any contamination, or dust, etc. with the Waste Cartridge Assembly facing up.
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
1. Remove the Toner Cartridge Cover Assembly
page 4-24).
2. Release latch A and open the Front Frame Assembly (PL 4.1.6).
3. Release latch C and open the Top Cover Assembly (PL 1.1.1) together with the Toner Cartridge
Cover Assembly (PL 1.12).
CAUTION: Be sure to hold the Toner Cartridge Cover Assembly together with the Top Cover
Assembly to prevent the Toner Cartridge Cover Assembly from swinging loosely.
Xerox Internal Use Only
(REP 1.9 Toner Cartridge Cover Assembly
Phaser 7100 Service Manual
Service Parts Disassembly
on
s7100-251
4-9