Service Parts Disassembly
REP 14.4 Duplex In Clutch Assembly/ Duplex Drive Gear Assembly Kit
PL 14.2.20/ PL 14.2.22
1.
Remove the Duplex Unit
2.
Remove the Duplex Motor Assembly
Note:
When removing the Idle Gear Assembly in the following step, do not drop the Swing Spring
(PL 14.2.17) and the Idle Gear 16 (PL 14.2.15).
3.
Remove the KL Clip that secures the Idle Gear Assembly and remove the Idle Gear Assembly.
Figure 1
4-254
Phaser 7100 Service Manual
(REP 14.1 Duplex Unit
(REP 14.5 Duplex Motor Assembly
on page 4-249).
on page 4-256).
s7100-287
Xerox Internal Use Only