Rep 11.7 Paper Handling Drive Assembly - Xerox Phaser 7100 Service Manual

REP 11.7 Paper Handling Drive Assembly

PL 11.1.19
Note: For additional tips, refer to the
in the Phaser 7100 Training materials).
1. Remove the I/P PWB Cover Assembly
page 4-19).
2. Remove the Rear Cover
3. Remove the Left Side Cover
4. Remove the Damper Spring (PL 4.1.3) from the Damper Assembly.
5. Remove 2 screws (silver, tapped, 12 mm) and 2 screws (silver, 6 mm) that secure the Rail Bracket
Assembly (PL 4.1.5) to the printer and remove the Rail Bracket Assembly.
6. Lift the Front Left Support Arm (PL 4.2.13) upward.
7. Remove one screw (silver, tapped, 12 mm) that secures the Base Bracket Assembly (PL 4.1.2) to
the printer.
8. Lift and shift the Base Bracket Assembly to remove.
Xerox Internal Use Only
Paper Handling Drive Assembly Removal video
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
(REP 1.10 Left Side Cover
Service Parts Disassembly
on page 4-25).
Base Bracket Assembly
Phaser 7100 Service Manual 4-197
(also available
on
s7100-227