Rep 14.3 Duplex Roller - Xerox Phaser 7100 Service Manual

REP 14.3 Duplex Roller

PL 14.2.9
1. Remove the Duplex Unit
2. Remove the Duplex Motor Assembly
Note: When removing the Duplex Drive Gear Assembly (PL 14.2.22) in the following step, be
careful not to drop the Bearing and the Gear.
3. Remove 2 screws that secure the PWB Shield (PL 14.3.10) and remove the Shield.
Figure 1
Xerox Internal Use Only
(REP 14.1 Duplex Unit
(REP 14.5 Duplex Motor Assembly
on page 4-249).
Phaser 7100 Service Manual 4-251
Service Parts Disassembly
on page 4-256).
s7100-451