116-702 Print with Substitute Font
Printing performed with a substitute font.
Applicable Fault Code
•
116-702: Print With Substitute Font
Initial Actions
•
Power cycle the printer.
•
If the problem persists, perform the following procedure
Troubleshooting Procedure
Step
Actions and Questions
1.
Use a valid font.
116-703 PostScript LANG Interprete ERR
Printing performed with a substitute font.
Applicable Fault Code
•
116-703: <PS Interpret error> An error has occurred in language analysis.
Initial Actions
•
Power cycle the printer.
•
If the problem persists, perform the following procedure
Troubleshooting Procedure
Step
Actions and Questions
1.
Go to
Common System Fail
When another PostScript printer exists at the customer site, print data on that printer and check if the
same problem occurs.
Xerox Internal Use Only
on page 2-406.
.
.
Phaser 7100 Service Manual 2-359
Error Troubleshooting