Error Troubleshooting
Invalid TIFF Data
Invalid TIFF data error has occurred.
Applicable Fault Code
•
016-731: <Invalid TIFF File> The TIFF data is broken or cut off halfway
Initial Actions
•
Power cycle the printer.
•
If the problem persists, perform the following procedure
Troubleshooting Procedure
Step
Actions and Questions
1.
Resend the data.
Form Not Registered
The decomposer detected that the form specified is not registered.
Applicable Fault Code
•
016-732: <Form Overlay Error> Data itself is not printed when the form specified is not registered
in emulation.
Initial Actions
•
Power cycle the printer.
•
If the problem persists, perform the following procedure
Troubleshooting Procedure
Step
Actions and Questions
1.
Resend the form data.
2-132
Phaser 7100 Service Manual
.
.
Xerox Internal Use Only