Rep 13.3 Left Arm Plate Hinge/ Right Arm Plate Hinge - Xerox Phaser 7100 Service Manual

Service Parts Disassembly

REP 13.3 Left Arm Plate Hinge/ Right Arm Plate Hinge

PL 13.1.8/ PL 13.1.9
CAUTION: Do not touch the IBT Belt surface.
1. Remove the IBT Unit
2. Remove the Top Cover Assembly
3. Remove the Top Right Guard Frame
page 4-172).
4. Remove the HVPS2 PWB
5. Remove the Top Frame Sub Assembly
4-244 Phaser 7100 Service Manual
(REP 9.10 IBT Unit on page 4-177).
(REP 1.1 Top Cover Assembly
(REP 9.8 Top Right Guard Frame/ Holder Stand Bar
(REP 12.1 HVPS2 PWB
(REP 13.2 Top Frame Sub Assembly
on page 4-9).
on page 4-202).
on
on page 4-240).
Xerox Internal Use Only