116-343 Main Pwba Ic Fail - Xerox Phaser 7100 Service Manual

116-343 Main PWBA IC Fail

Irregularity was detected in the IC of the I/P PWB.
Applicable Fault Code
• 116-343: Main PWBA IC Fail
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
Troubleshooting Reference
Applicable Parts
• Image Processor PWB, PL 12.4.1
Troubleshooting Procedure
Step Actions and Questions
1. Go to Common System Fail
Xerox Internal Use Only
on page 2-406.
.
Wiring and Plug/Jack Map References
Phaser 7100 Service Manual 2-337
Error Troubleshooting