Regulatory; United States (Fcc Regulations); Canada - Xerox Phaser 7100 Service Manual

Hide thumbs Also See for Phaser 7100:

Table of Contents

General and Operation Overview

Regulatory

Xerox has tested this product to electromagnetic emission and immunity standards. These standards

are designed to mitigate interference caused or received by this product in a typical office

environment.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in

accordance with these instructions, it may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his/her own expense.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment Off and On, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not approved by Xerox can void the authority of the user

to operate this equipment.

To ensure compliance with Part 15 of the FCC rules, use shielded interface cables.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Phaser 7100 Service Manual

Xerox Internal Use Only