Rep 2.8 Left Tray Guide Assembly - Xerox Phaser 7100 Service Manual

REP 2.8 Left Tray Guide Assembly

PL 2.1.9
1. Remove Tray 1.
2. Remove the I/P PWB Cover Assembly
page 4-19).
3. Remove the Rear Cover
4. Remove the Right Side Cover
5. Remove the Right Feeder Cover
6. Remove the Protect Cover Assembly
7. Remove the Right Turn Bracket Assembly
8. Remove the Feeder Assembly
9. Remove the Left Side Cover
10. Remove the Left Feeder Cover
11. Remove the Tray Cover
12. Remove 2 screws (silver, tapped, 10mm) that secure the Tray Guide Assembly.
13. From the inside of the printer, release the hook that secures the Left Tray Guide Assembly while
pushing the Guide Assembly toward the front and inner side of the printer and pull the Guide
Assembly out to remove.
Xerox Internal Use Only
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
(REP 1.11 Right Side Cover
(REP 2.3 Right Feeder Cover
(REP 2.7 Protect Cover Assembly
(REP 2.4 Right Turn Bracket Assembly
(REP 2.1 Feeder Assembly
(REP 1.10 Left Side Cover
(REP 2.10 Left Feeder Cover
(REP 2.11 Tray Cover on page 4-50).
Service Parts Disassembly
on page 4-27).
on page 4-40).
on page 4-44).
on page 4-37).
on page 4-25).
on page 4-49).
Hook
Phaser 7100 Service Manual
on
on page 4-41).
s7100-065
4-47