REP 4.8 Chute Assembly
PL 4.2.17
WARNING:
The Fuser may be hot. Turn the printer power Off and allow at least 30 minutes for
the Fuser to cool before removing the Fuser.
1.
Remove the Fuser Unit
2.
Remove the Transfer Roller (2nd BTR Unit)
page 4-108).
3.
Remove 2 screws (silver, tapped, 8 mm) that secure the Chute Assembly to the Front Frame
Assembly and remove the Chute Assembly.
Xerox Internal Use Only
(REP 10.1 Fuser Unit
on page 4-183).
(REP 4.10 Transfer Roller (2nd BTR Unit)
Service Parts Disassembly
on
Phaser 7100 Service Manual 4-103
s7100-205