Rep 3.4 Left/ Right Bypass Tray Cover Lock - Xerox Phaser 7100 Service Manual

Service Parts Disassembly

REP 3.4 Left/ Right Bypass Tray Cover Lock

PL 3.1.11/ PL 3.1.12
1. Open the Bypass Tray Cover (PL 3.1.9).
2. Remove the Bypass Tray Assembly
3. While pressing down on the 2 tabs on the Bypass Tray Cover side of the Bypass Tray Strap (PL
3.1.1), slide the Bypass Tray Strap horizontally to remove it.
Note: Be careful not to mix the left and the right of Left/ Right Bypass Tray Cover Lock (PL 3.1.11/
PL 3.1.12). The Left Bypass Tray Cover Lock has an "L" engraved mark, while the Right Bypass Tray
Cover Lock has an "R" engraved mark.
4. Rotate the Left/ Right Bypass Tray Cover Lock that secure the Bypass Tray Cover Assembly to the
Left/ Right Pin (PL 3.1.10/ PL 3.1.13) upward and pull the Bypass Tray Cover Assembly toward the
inner side to remove it.
Strap
4-72 Phaser 7100 Service Manual
(REP 3.5 Bypass Tray Assembly
Bypass Tray Cover Lock
on page 4-73).
Xerox Internal Use Only
s7100-324