Rep 2.22 Lift Up Gear - Xerox Phaser 7100 Service Manual

REP 2.22 Lift Up Gear

PL 2.3.34 - PL 2.3.42
1. Remove Tray 1.
2. Remove one screw (silver, tapped, 10 mm) that secures the Bottom Up Cover (PL 2.3.42) and
remove the Cover.
Figure 1
Note: When removing various parts of the Lift Up Gear Kit in the following step, be careful not to
drop or lose any parts (see
3. Remove the various parts of the Lift Up Gear Kit.
Xerox Internal Use Only
Figure 2 on page 4-68).
Service Parts Disassembly
s7100-086
Phaser 7100 Service Manual 4-67