Service Parts Disassembly
Overview
This chapter contains the removal procedures for field-replaceable parts listed in Chapter 5, Parts List.
In most cases, the replacement procedure is simply the reverse of the removal procedure.
In some instances, additional steps are necessary and are provided for replacement of the parts. For
specific assemblies and parts, refer to the
Note:
Always use the correct type and size screw (see
wrong screw can damage tapped holes. Do not use excessive force to remove or install either a
screw or a printer part.
Standard Orientation of the Printer
When needed, printer orientation is called out in the procedure as an aid to locating parts. Figure 1
illustrates the right, left, front, and rear sides of the printer.
Figure 1
Left
4-6
Phaser 7100 Service Manual
Parts List
Front
on page 5-1.
Fastener Types
on page 4-8). Using the
Rear
Right
s7100-037
Xerox Internal Use Only