Rep 2.13 No Paper Sensor - Xerox Phaser 7100 Service Manual

Service Parts Disassembly

REP 2.13 No Paper Sensor

PL 2.2.2
1. Remove Tray 1.
2. Remove the Bypass Tray Frame Assembly
3. Remove the I/P PWB Cover Assembly
page 4-19).
4. Remove the Rear Cover
5. Remove the Right Side Cover
6. Remove the Right Feeder Cover
7. Remove the Protect Cover Assembly
8. Remove the Right Turn Bracket Assembly
9. Remove the Feeder Assembly
10. Disconnect the wiring harness connector P/J4652A.
11. Release the hooks that secure the No Paper Sensor and remove the Sensor.
4-52 Phaser 7100 Service Manual
(REP 3.1 Bypass Tray Frame Assembly
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
(REP 1.11 Right Side Cover
(REP 2.3 Right Feeder Cover
(REP 2.7 Protect Cover Assembly
(REP 2.4 Right Turn Bracket Assembly
(REP 2.1 Feeder Assembly
P/J4652A
on page 4-27).
on page 4-40).
on page 4-44).
on page 4-37).
Xerox Internal Use Only
on page 4-69).
on
on page 4-41).
s7100-070