116-397 Aaamgr Illegal Setting Area Coverage Threshold - Xerox Phaser 7100 Service Manual

Hide thumbs Also See for Phaser 7100:

Table of Contents

116-397 AAAmgr Illegal Setting Area Coverage Threshold

When the setting value of the system data in the boot sequence, fulfilled any of the following

conditions. 720-061 (threshold B) <= 720-060 (threshold A)

If the value of Chain-Link 720-060 is lower than 720-061 a Fault will be detected.

As a Fault will be detected when the value of Chain-Link 720-060 is lower than 720-061, the value

of Chain-Link 720-060 must not be lower than 720-061.

Applicable Fault Code

116-397: Plain Total Color Judgment Threshold Value Settings Incorrect

Initial Actions

Power cycle the printer.

If the problem persists, perform the following procedure

Troubleshooting Procedure

Actions and Questions

Set the value of system data such that it conforms to the following relative value.

Chain-Link 720-061 (threshold B) > Chain-Link 720-060 (threshold A)

The value of Chain-Link 720-060 cannot be lower than that of 720-061.

Xerox Internal Use Only

Phaser 7100 Service Manual 2-357

Error Troubleshooting