Rep 1.11 Right Side Cover - Xerox Phaser 7100 Service Manual

REP 1.11 Right Side Cover

PL 1.1.16
1. Remove the I/P PWB Cover Assembly
page 4-19)
2. Remove the Rear Cover
3. Release latch A and open the Front Frame Assembly (PL 4.1.6).
4. Release latch C and open the Top Cover Assembly (PL 1.1.1) together with the Toner Cartridge
Cover Assembly (PL 1.1.12).
CAUTION: Be sure to hold the Toner Cartridge Cover Assembly together with the Top Cover
Assembly to prevent the Toner Cartridge Cover Assembly from swinging loosely.
5. Release the Stand Bar Assembly (PL 9.1.26) from the Top Cover Assembly and secure the Stand
Bar in the holder.
CAUTION: Do not touch the bottom of the IBT Belt to prevent damaging the IBT Belt.
Xerox Internal Use Only
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
Service Parts Disassembly
s7100-251
s7100-252
Phaser 7100 Service Manual
on
4-27