Iq-16 Fringe - Xerox Phaser 7100 Service Manual

IQ-16 Fringe

There is toner scattering around the image of multiple color sections.
Initial Action
• Check the paper transfer path is free of paper dust and debris.
Troubleshooting Reference
Applicable Parts
• Transfer Roller (2nd BTR), PL 4.3.18
• IBT Unit, PL 9.1.99
• HVPS2 PWB, PL 12.1.2
Troubleshooting Procedure
Step Actions and Questions
1. Check for moisture effect on the paper.
Load a freshly opened (or one that has been
sealed in moisture controlled environment)
recommended paper and perform test print.
Is the image printed normally?
2. Check the Paper Type settings.
Does the printed paper match the Paper Type
that is set?
3. Check the transfer voltage.
Perform Adjusting Voltage Offset
Perform a test print.
Is the image printed normally?
Xerox Internal Use Only
Example Print
Troubleshooting
complete.
Go to step 3.
Troubleshooting
complete.
on page 6-19.
Yes
Go to step 2.
Set the correct paper
type (Adjusting Paper
Type on page 6-18).
Go to step 4.
Phaser 7100 Service Manual
Image Quality
Fringe
No
3-45