250-Sheet Feeder
REP 2.1 Feeder Assembly
PL 2.1.1
1.
Remove Tray 1.
2.
Remove the Bypass Tray Frame Assembly
3.
Remove the I/P PWB Cover Assembly
4.
Remove the Rear Cover
5.
Remove the Right Side Cover
6.
Remove the Right Feeder Cover
7.
Remove the Protect Cover Assembly
8.
Remove the Right Turn Bracket Assembly
9.
Remove the Right Turn Gear
10. Remove 2 screws (silver, tapped, 12mm) that secure the Feeder Assembly.
Xerox Internal Use Only
(REP 3.1 Bypass Tray Frame Assembly
(REP 1.5 Image Processor (I/P) PWB Cover
(REP 1.6 Rear Cover
on page 4-20).
(REP 1.11 Right Side Cover
(REP 2.3 Right Feeder Cover
(REP 2.7 Protect Cover Assembly
(REP 2.4 Right Turn Bracket Assembly
(REP 2.2 Right Turn Gear Assembly
Service Parts Disassembly
on page 4-27).
on page 4-40).
on page 4-44).
on page 4-39).
Phaser 7100 Service Manual
on page 4-69).
Assembly).
on page 4-41).
s7100-318
4-37