Rep 9.4 Waste Cartridge Full Sensor - Xerox Phaser 7100 Service Manual

Service Parts Disassembly

REP 9.4 Waste Cartridge Full Sensor

PL 9.1.5
CAUTION: Do not touch the IBT Belt surface. Carefully place the IBT Unit on a flat surface that is
free of any contamination, or dust, etc. with the Waste Cartridge Assembly facing up.
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
1. Remove the Toner Cartridge Cover Assembly
page 4-24).
2. Release latch A and open the Front Frame Assembly (PL 4.1.6).
3. Release latch C and open the Top Cover Assembly (PL 1.1.1) together with the Toner Cartridge
Cover Assembly (PL 1.12).
4. Remove the IBT Unit
5. Remove the Waste Cartridge Guide Assembly
page 4-162).
4-164 Phaser 7100 Service Manual
(REP 9.10 IBT Unit on page 4-177).
(REP 1.9 Toner Cartridge Cover Assembly
(REP 9.3 Waste Cartridge Guide Assembly
on
s7100-251
on
Xerox Internal Use Only