Rep 12.12 Hv Main Guide Assembly - Xerox Phaser 7100 Service Manual

REP 12.12 HV Main Guide Assembly

PL 12.2.11
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
1. Remove the Imaging Unit (Y/ M/ C/ K)
2. Remove Tray 1.
3. Remove the I/P PWB Cover Assembly
page 4-19).
4. Remove the Rear Cover
5. Remove the Right Side Cover
6. Remove the Right Feeder Cover
7. Remove the Cam Cover
8. Remove the IBT Retract Cam Assembly
9. Remove the Right Imaging Unit Guide Assembly
page 4-123).
10. Remove the Left Imaging Unit Guide Assembly
page 4-129).
11. Remove the Developer Housing Assembly (Y/ M/ C/ K)
M/ C/ K) on page 4-137)
12. Remove the Laser Unit
Spring Assembly/ Left Rear Spring Assembly
13. Remove the Right Hand HV Guide Assembly
page 4-142).
Xerox Internal Use Only
(REP 6.0 Imaging Unit (Y/ M/ C/ K)
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
(REP 1.11 Right Side Cover
(REP 2.3 Right Feeder Cover
(REP 9.7 Cam Cover on page 4-170).
(REP 9.6 IBT Retract Cam Assembly
(REP 7.1 ROS Assembly (Laser Unit)/ Front Spring Assembly/ Right Rear
on page 4-130).
(REP 8.2 Right Hand HV Guide Assembly
on page 4-27).
on page 4-40).
(REP 6.1 Right Imaging Unit Guide Assembly
(REP 6.5 Left Imaging Unit Guide Assembly
(REP 8.1 Developer Housing Assembly (Y/
Phaser 7100 Service Manual 4-219
Service Parts Disassembly
on page 4-121).
on
on page 4-168).
on
on
on