Rep 2.12 Turn Roller Assembly - Xerox Phaser 7100 Service Manual

REP 2.12 Turn Roller Assembly

PL 2.2.1
1. Remove Tray 1.
2. Remove the Bypass Tray Frame Assembly
3. Remove the I/P PWB Cover Assembly
page 4-19).
4. Remove the Rear Cover
5. Remove the Right Side Cover
6. Remove the Right Feeder Cover
7. Remove the Protect Cover Assembly
8. Remove the Right Turn Bracket Assembly
9. Remove the Feeder Assembly
10. Remove the E-rings that secure the left and right Sleeve Bearings (PL 2.2.6).
11. Remove the Sleeve Bearings that secure the Turn Roller Assembly.
12. Slide the Turn Roller Assembly toward the right, free the Shaft from the Sleeve Bearing hole while
lifting the Turn Roller to remove.
Xerox Internal Use Only
(REP 3.1 Bypass Tray Frame Assembly
(REP 1.5 Image Processor (I/P) PWB Cover Assembly
(REP 1.6 Rear Cover on page 4-20).
(REP 1.11 Right Side Cover
(REP 2.3 Right Feeder Cover
(REP 2.7 Protect Cover Assembly
(REP 2.4 Right Turn Bracket Assembly
(REP 2.1 Feeder Assembly
Service Parts Disassembly
on page 4-27).
on page 4-40).
on page 4-44).
on page 4-37).
Phaser 7100 Service Manual
on page 4-69).
on
on page 4-41).
s7100-069
4-51