Firmware Update - Xerox Phaser 7100 Service Manual

Maintenance

Firmware Update

Note: The firmware update for Macintosh version will be available post launch.
Two methods are available for updating firmware:
• Ethernet port with Download Tool
• USB printer port with Download Tool
Note: If a Hard Disk Drive is installed, firmware can be downloaded via CWIS.
1. Open a web browser.
2. Enter the printer's IP address.
3. On the top menu, click Properties.
4. On the left side, expand
5. Under Machine Software
to begin the download the process
Enabling Software Upgrades/ Download
Verify that Software Upgrades/ Download is Enabled (using the Control Panel and/ or CWIS).
Notes:
• For updating firmware using the Ethernet port, Software Upgrades/ Download must be
Enabled on both the Control Panel and in CWIS.
• For updating firmware using the USB printer port, only Software Download must be
Enabled on the Control Panel.
Using the Control Panel
On the Control Panel, press Menu.
1.
Press Down/ Up Arrow and navigate to
2.
3. Press Down/ Up Arrow and navigate to
4. Press Down/ Up Arrow and navigate to
5. Press Down/ Up Arrow and navigate to Enabled, and press OK.
6. Verify that a "dot" is displayed in front of Enabled.
7. Press Menu to return to the
6-22 Phaser 7100 Service Manual
Services > Machine Software
window, browse for the firmware filename and select the
Admin
System
Software
Ready to Print screen.
> Manual Upgrades.
Menu, and press OK.
Settings, and press OK.
Download, and press OK.
green button
Xerox Internal Use Only