Maintenance
Adjustments
Resetting the Transfer Roller (2nd BTR) Counter
The Transfer Roller Counter must be reset when a Transfer Roller is replaced.
1.
On the Control Panel, press Down Arrow + OK simultaneously.
2.
The
Reset Counter
3.
Press OK.
4.
The
Reset Counter 2ndBiasTransRoll
5.
Press OK.
6.
Press OK again to reset the Transfer Roller Counter.
7.
The
Reset completed for 2nd Bias Trans Roll
8.
Press Menu to return to the
Adjust Gradation
Adjust Gradation feature allows user to adjust the Shadows, Midtones, and Highlights for all four colors
C/ M/ Y/ K using the Control Panel or CenterWare IS.
CAUTION:
The Phaser 7100 printer does not have a standard chart for measurement. This
feature is available only for Reference. It is NOT recommended to perform this procedure.
Improper settings may affect print quality.
Using the Control Panel
On the Control Panel, press Menu.
1.
Press Down Arrow and navigate to
2.
3.
Press Down Arrow and navigate to
4.
Press Down Arrow and navigate to
5.
Press Down Arrow and navigate to
6.
The
Text or Photo CalibrationChart
7.
Press OK.
8.
A
Load 8.5 x 11 in Tray 5
Note:
Be sure to load paper Long-Edge Feed.
9.
A
Calibration Chart printing.... please wait
10. Press Back to return to the
11. Press Down Arrow to display the
12. Press Right Arrow to display the color to be adjusted.
Note:
Use the Down/ Up Arrow to find and select the color to be adjusted.
6-12
Phaser 7100 Service Manual
screen appears.
screen appears.
Ready to Print
Admin
Image
Adjust
Adjust Gradation Photo or Text
screen appears.
(Bypass Tray)
and press OK
Text or Photo CalibrationChart
Enter Value
appears.
screen.
Menu, and press OK.
Quality, and press OK.
Gradation, and press OK.
message appears.
message appears.
screen.
menu.
screen, and press OK.
Xerox Internal Use Only