Service Maintenance Procedure; Recommended Tools; Repair, Inspect, And Prevent (Rip) Procedure - Xerox Phaser 7100 Service Manual

Hide thumbs Also See for Phaser 7100:

Table of Contents

Service Maintenance Procedure

Maintenance Safety

Do not attempt any maintenance procedure that is not specifically described in the

documentation supplied with your printer.

Do not use aerosol cleaners. Clean the printer with a dry lint-free cloth only.

Do not burn any consumables or routine maintenance items. For information on Xerox supplies

recycling programs, go to www.xerox.com/gwa.

Perform the following procedures whenever you check, service, or repair a printer. Cleaning the printer,

as outlined in the following steps, assures proper operation of the printer and reduces the probability of

having to service the printer in the future.

The frequency of use, the type of paper printed on, and operating environment are factors in

determining how critical cleaning the printer is and how often it is necessary.

Toner vacuum cleaner

Clean, dry, lint-free cloth

Black, light protective bag

Perform these routine maintenance procedures during the course of servicing the printer.

Clean the Feed Rollers, Transfer Rollers, and Paper Guides; replace if necessary.

Remove and clean the paper trays.

Print a Configuration and Error History pages; diagnose, and repair any problems as indicated.

Check cleanliness of the interior and exterior, including Fans; if necessary, clean (dust or vacuum)

these areas.

Review proper printer operation using a customer file, if possible. Check with the customer

regarding any special applications they may be using.

Review with the customer all work that was performed and discuss proper printer care.

Phaser 7100 Service Manual

Xerox Internal Use Only