Transfer Roller (Pl4.16.3) - Xerox Phaser 6115MFP Service Manual

Service Parts Disassembly

Transfer Roller (PL4.16.3)

8-86
1. Open the Top Cover.
2. Remove the Imaging Unit (page 7-15).
3. Remove the Transfer Roller Assembly as follows. While squeezing the
white tabs of the holders located on both sides, pull out the roller.
Caution
Use care not to lose the two springs of the assembly. They can easily
come off.
4. Remove the conductive material, gear (PL4.16.7), two springs (PL4.16.5),
two holders (PL4.16.6), and two collars (PL4.16.2).
Transfer Roller
Tab
Tab
Phaser 6115MFP Multifunction Product Service Manual
s6115-268