Error Messages and Codes
Toner K CRUM Data Broken Fail/ Toner K CRUM Data Mismatch Fail
Applicable Chain-Link Codes
Initial Actions
3-290
The system detected that the data written to the Toner CRUM (K) and the data
read from the Toner CRUM (K) do not match.
Incorrect authentication area data was detected in Toner CRUM (K).
093-925: Toner K CRUM Data Broken Fail
•
•
093-926: Toner K CRUM Data Mismatch Fail
•
Check the Toner Cartridge life.
•
If the problem persists, follow the procedure below.
Troubleshooting Reference
Applicable Parts
Toner Cartridge (K), PL5.1.1
■
1. Remove and reinstall the Toner Cartridge (K) and check for improper
installation (REP 1.1,
page
2. If no problems are found, replace the Toner Cartridge (K) (REP 1.1,
Wiring and Plug/Jack Map References
8-9).
Phaser 7500 Printer Service Manual
page
8-9).