Pg Speed Control Card Terminals And Specifications - YASKAWA G7 Series Technical Manual

PG Speed Control Card Terminals and Specifications

The terminal specifications for the PG Speed Control Cards are given in the following tables.
PG-A2
The terminal specifications for the PG-A2 are given in the following table.
Terminal No.
1
Power supply for pulse generator
2
3
+12 V/open collector switching ter-
minal
4
TA1
5
Pulse input terminal
6
7
Pulse motor output terminal
8
TA2 (E) Shield connection terminal
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 2.15 PG-A2 Terminal Specifications
Contents
12 Vdc (±5%), 200 mA max.
0 Vdc (GND for power supply)
Terminal for switching between12 Vdc voltage input
and open collector input. For open collector input,
short across 3 and 4.
H: +4 to 12 Vdc; L: +1 Vdc max. (Maximum response
frequency: 30 kHz)
Pulse input common
12 Vdc (±10%), 20 mA max.
Pulse monitor output common
Installing and Wiring Option Cards
Specifications
-
33
2-