YASKAWA G7 Series Technical Manual page 355

Multi-function Contact Input Functions (H1-01 to H1-10)
Setting
Value
72 Zero-servo command (ON: Zero-servo)
Multi-function Contact Output Functions (H2-01 to H2-03)
Setting
Value
Zero-servo end
33
ON: Current position is within zero-servo start position ± the zero-servo end width.
To output the zero-servo status externally, assign the Zero Servo End signal (setting 33) to one of the multi-
function outputs (H2-01 to H2-03).
Monitor Function
Name
Parameter
Number
Display
Zero-servo
movement
Shows the number of PG pulses
pulses
U1-35 times 4 for the movement range
when stopped at zero.
Zero Servo
Pulse
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Function
Function
Output Signal Level During
Description Multi-Function
Analog Output
(Cannot be output.)
Individual Functions
Control Methods
Open Open
V/f
Loop Flux Loop
V/f with
Vector Vector Vector
PG
1
No No No Yes No
Control Methods
Open Open
V/f
Loop Flux Loop
V/f with
Vector Vector Vector
PG
1
No No No Yes No
Control Methods
Open Open
Min.
V/f
Loop Flux Loop
Unit
V/f with
Vector Vector Vector
PG
1
1 No No No A
2
2
2
No
137
6-