YASKAWA G7 Series Technical Manual page 375

Name
Parameter
Number
Display
DO-08 Channel Sets the digital output function
5 Output Selec- number for channel 5. See the H2
tion parameter group for possible
F5-05
selections.
Enabled when digital output card
DO Ch5 Select
DO-02 or DO-08 is used.
DO-08 Channel Sets the digital output function
6 Output Selec- number for channel 6. See the H2
tion parameter group for possible
F5-06
selections.
Enabled when digital output card
DO Ch6 Select
DO-02 or DO-08 is used.
DO-08 Channel Sets the digital output function
7 Output Selec- number for channel 7. See the H2
tion parameter group for possible
F5-07 selections.
Enabled when digital output card
DO Ch7 Select
DO-02 or DO-08 is used.
DO-08 Channel Sets the digital output function
8 Output Selec- number for channel 8. See the H2
tion parameter group for possible
F5-08
selections.
Enabled when digital output card
DO Ch8 Select
DO-02 or DO-08 is used.
DO-08 Output Sets the function of the DO-08
Mode Selection digital output option board.
0: 8-channel individual outputs.
F5-09 1: Binary code output.
DO-08 Selec-
2: 8-channel Selected - Output
tion
according to F5-01 to F5-08
settings.
Setting Output Items for the DO-02C Digital Output Card
If using DO-02C Digital Output Card, set the output items using F5-01 and F5-02.
Setting Output Items for the DO-08 Digital Output Card
If using DO-08 Digital Output Card, select one of the following three output modes according to the setting in
F5-09.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting
Description
Range
0 to 37
0 to 37
0 to 37
0 to 37
0 to 2
Control Methods
Change
Open
Factory
V/f
during
Loop
Setting
V/f with
Operation
Vector
PG
6 No A A
37 No A A
F No A A
F No A A
0 No A A
Options
Open
Flux Loop
Vector Vector
1 2
A A A
A A A
A A A
A A A
A A A
157
6-