Olivetti d-Color MF4003 Service Manual page 90

d-Color MF4003/MF3303
[1]
[3] [1] [2]
[3] [1]
8. To reinstall, reverse the order of removal.
9. Carry out the [Service Mode] -> [Counter] -> [Life] -> [New Release].
3.2 PF-P20/PF-P21
3.2.1 Replacing the tray 2/3 pick-up roller, feed roller
1. Remove the tray 2 or tray 3.
F.6.3 Tray 2, tray 3 (PF-P20/PF-P21)
[1]
[3] [2]
3. To reinstall, reverse the order of removal.
4. Select [Service Mode] -> [Counter] -> [Life] and clear the count of [2nd Feed Count] or [3rd Feed Count].
3.2.2 Replacing the tray 2/3 separation roller
1. Slide out the tray 2 or tray 3.
[1]
Service Manual
[1] [3]
[3]
E MAINTENANCE > 3. Periodical replacement procedure
6. Disconnect the connector [1].
NOTE
▪ When removing the connector [1], press the claw to release the lock,
then remove it.
7. Remove four screws [1], and remove the fusing unit [2].
NOTE
▪ When removing the fusing unit, hold the parts [3] shown in the
illustration. Make sure to hold it firmly so that it would not fall due to
its weight.
2. Unhook the tab [1], and remove the feed roller [2] and pick-up roller [3].
2. Remove the cover [1].
E-14
Y119930-3