Olivetti d-Color MF4003 Service Manual page 189

d-Color MF4003/MF3303
Key name
OpenAPI Setting
TCP Socket Setting
IEEE802.1X Authentication
Setting
LLTD Setting
BMLinkS Settings (Only for
Japan)
SSDP Settings
Web Browser Setting
Single Sign-On Setting
IWS Settings
Machine Update Settings
Remote Panel Settings
d-Color Remote Access Setting
Y119930-3
WebDAV Server Settings
Proxy Setting for Remote Access To configure the settings of the proxy server used when MFP accesses to
[Specified Application Start Setting] will be displayed when [Service Mode] -> [System 2] -> [Application
Change Setting] is set to "Permit."
-
IEEE802.1X Authentication
Setting
IEEE802.1X Setting
IEEE802.1X Authentication Trial
-
-
-
To enable the Web browser function, this machine is automatically connected to the License Management
Server (LMS) on the Internet in order to register the license. Check that this machine can be connected to the
Internet before beginning this procedure.
When [Administrator] -> [User Auth/Account Track] -> [Authentication Type] -> [User Authentication] is set to
[ON (External Server)] or [ON (MFP + External Server)], this function is available.
For details of the functions, refer to "
Internet ISW FTP Server
Settings Setting
Update
Firmware at
Specified Time
Firmware
Update
Parameters
Machine Auto • This is displayed when [Function Setting] is set to "ON" in [Service Mode] -> [Machine
Update Settings Update Setting] -> [Internet ISW] -> [Internet ISW Set].
• This function is same as that of the service mode, but it will not be used together with
the function of the service mode.
• For details of the functions, refer to "
HTTP Proxy For details of the functions, refer to "
Settings
• This is not displayed when [Service Mode] -> [Enhanced Security] -> [CE Authentication] is set to "OFF."
• For details of the functions, refer to "
• To remote-control the Control Panel of this machine using an Android/iOS terminal, you need to install
Remote Access on the Android/iOS terminal. Also, [TCP Socket] must be set to "ON" for [Administrator] -
> [Network] -> [TCP Socket Setting].
• To connect the device to this machine through d-Color Remote Access using NFC, configure a setting
to enable NFC on this machine in advance.
• To connect the device to this machine through d-Color Remote Access using Bluetooth LE, configure
a setting to enable Bluetooth LE on this machine in advance.
Function/Precondition
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to
"ON," setting [SSL Setting] to "SSL Only" cancels enhanced security
mode.
• Press [Initial Password] under [Password Setting] to initialize the
password. (Default password: sysadm)
OLI license server via WebDAV connection from [Administrator] ->
[License Settings] -> [Install License] (WebDAV connection) or [Service
Mode] -> [Billing Setting] to activate i-Option function.
IEEE802.1X authentication settings are made with Web Connection.
It will be displayed when [Administrator] -> [Network] -> [Network I/F
Configuration] is set to "Wireless Only."
-
H.12.5.2 IWS Settings."
• This is displayed when [Function Setting] is set to "ON" in [Service
Mode] -> [Machine Update Setting] -> [Internet ISW] -> [Internet ISW
Set].
• This is displayed when [FTP data acquisition setting] is set to "ON" in
[Service Mode] -> [Machine Update Setting] -> [Internet ISW] -> [FTP
Setting].
• For details of the functions, refer to "
• This is displayed when [Function Setting] is set to "ON" in [Service
Mode] -> [Machine Update Setting] -> [Internet ISW] -> [Internet ISW
Set].
• This is displayed when [Open Mode Settings] is set to "Set" in
[Service Mode] -> [Machine Update Setting] -> [Internet ISW] ->
[Internet ISW Set].
• For details of the functions, refer to "
• This is displayed when [Function Setting] is set to "ON" in [Service
Mode] -> [Machine Update Setting] -> [Internet ISW] -> [Internet ISW
Set].
• This is displayed when [Open Mode Settings] is set to "Set" in
[Service Mode] -> [Machine Update Setting] -> [Internet ISW] ->
[Internet ISW Set].
• To download the firmware, in addition to the necessary proxy settings
configured in [FTP Server Settings], you need to configure
appropriate settings in [Service Mode] -> [Machine Update Setting] ->
[Internet ISW] -> [HTTP Setting], [FTP Setting], and [Forwarding
Access Setting].
• For details of the functions, refer to "
H.12.6.2 Machine Auto Update
H.12.6.3 HTTP Proxy
H.12.5.3 Remote Panel
H-21
H UTILITY MODE > 6. Administrator
H.12.6.1 Internet ISW
H.12.6.1 Internet ISW
H.12.6.1 Internet ISW
Settings."
Settings."
Settings."
Service Manual
Settings."
Settings."
Settings."