Olivetti d-Color MF4003 Service Manual page 391

d-Color MF4003/MF3303
[1]
[2]
5. Firmware Update selection screen is displayed.
NOTE
▪ Unless one of the keys on the control panel is pressed, firmware is automatically updated after 30 seconds when the main power
switch is turned on.
▪ Selectable items displayed change depending on equipped options, etc.
Selecting the firmware data
• When multiple set of firmware data is stored in the USB memory, a set of data can be selected.
• The firmware data in the update data folder "FW0022" copied to the root directory of the USB memory is selected as the default data.
<Procedure>
1. Touch [FW Data Select] on the firmware update selection screen.
2. After the data in the USB memory is checked, a list of the available firmware data is displayed.
• The default data is indicated by an asterisk (*).
3. Select the firmware, and touch [OK].
Language Selection
• Select the language data displayed on the Language Selection screen of Utility.
• Select languages as required according to, for example, the use environment of the user.
NOTE
▪ Up to 9 languages are selectable. However, Japanese and English are essential options.
<Procedure>
1. Touch [Language Select] on the firmware update selection screen.
2. On the Language Select screen, select a language to be displayed on the LCD area of the control panel, then touch [Fix].
Y119930-3
2. Connect the USB memory containing the firmware into the USB port on the
right side of the control panel.
3. Remove the cover [1] at the back of the control panel.
4. Turn the main power switch ON while pressing the [Rear Stop] key [2].
K-3
K FIRMWARE > 2. USB memory
Service Manual