Olivetti d-Color MF4003 Service Manual page 291

d-Color MF4003/MF3303
Sample
14.1.6 8 Color Solid Pattern
• To produce an 8-color solid pattern.
• Used for checking color reproducibility and uneven density of each color.
Setting item
Output operation mode
Screen pattern setting
1-Sided/2-sided print mode
Density
Sample
14.1.7 CMM pattern
• To produce a CMM (Color Management Module) pattern.
• Used to check color difference depending on the places where output is made.
Setting item
Copies
Screen pattern setting
Angle
Sample
14.2 Paper Passage Test
• To test the printing operation in paper passage test.
• Use to check the printing operation in paper passage test from each paper source.
Setting item
Pattern Printing
Select Tray
Paper Size
Paper Type
NOTE
▪ [Paper Size] is selectable only when [Manual] is selected in Select Tray.
▪ The paper type is only [Plain paper] when [Tray 2] or [Tray 3] is selected.
<Procedure>
1. Select a setting item.
2. Press the Start key to start the paper passage test.
3. Pressing the Stop key will stop operation.
Y119930-3
• SINGLE
• HYPER
• Gradation
Setting value
SINGLE Copies (1 to 999)
MULTI
FEET
HYPER Gradation, Resolution, Error diffusion
1-sided
0 to 255
• SINGLE
• HYPER
• Gradation
• Density: 255
Setting value
1 (always)
Error diffusion, Gradation, Resolution
0 degrees, 90 degrees, 180 degrees, 270 degrees
• Error diffusion
• Angle: 270 degrees
Yes, No
Tray 1, Tray 2, Tray 3, Tray 4, Manual
1
A4, 8 / x 11, Post, A6 card, 4 x 6
2
Plain Paper, Plain Paper+, Thick1, Thick 1+, Thick 2, Enve.
I-75
I SERVICE MODE > 14. Test Mode
Setting value
Service Manual