Olivetti d-Color MF4003 Service Manual page 338

d-Color MF4003/MF3303
17. Network Settings
17.1 2nd Network Setting
NOTE
▪ Before making settings, note the network environment of the customer and make the settings to suit the environment.
2nd network card settings
• To be configured when an optional Upgrade Kit (wireless LAN) has been installed in this machine.
NOTICE
• To perform a remote control from an Android tablet terminal or iOS terminal, d-Color Remote Access are required.
Setting item
Set To be selected to install optional wireless LAN devices.
Unset To be selected not to install optional wireless LAN devices.
NOTE
▪ When [Set] is selected, make sure that the set wireless LAN is displayed, and configure the following settings.
Network interface structure
• To connect the MFP main unit as a wireless LAN adapter to a wireless LAN access point connected to the LAN environment. (when
Wireless Only or Wired+Wireless (Secondary Mode) is selected)
• To perform direct communication between the MFP main unit and a mobile device. (when Wired+Wireless (Primary Mode) or Wired
+Wireless (Wi-Fi Direct) is selected)
Network Interface Settings
Wired Only
Wireless Only
Wired+Wireless (Secondary Mode) Select this option to use this machine in both the wired LAN environment and wireless LAN environment.
Wired+Wireless (Primary Mode)
Wired+Wireless (Wi-Fi Direct)
17.2 Remote Service Setting
17.2.1 Function Setting
Enable Settings
• To set whether to use the remote service.
NOTE
▪ When [ON] is selected, [Service Mode] -> [Machine Update Setting] -> [Machine Auto Update setting], [Auto Update setting] will
not be displayed.
▪ When [ON] is selected, [Service Mode] -> [Machine Update Setting] -> [Machine Auto Update setting], [Relay server setting] will
not be displayed.
ON
Disable
Server Settings
• To set URL, ID and password of the server to be used on remote service communication.
Setting item
URL (Address or host name): port number
ID Alphanumeric characters and symbols: 1-64 characters
Password Alphanumeric characters and symbols: 0-64 characters
17.2.2 Proxy Server Setting
Enable Settings
• To set whether to use the proxy server.
• When [ON] is set, the [WebDAV Synchronize] and [Proxy Server] settings can be configured.
ON
Disable
Service Manual
Select this option to use this machine only in the wired LAN environment.
Select this option to use this machine only in the wireless LAN environment.
A job is received from the client via the wireless LAN access point and executed.
To execute a job received from a client via the LAN.
A job is received from the client via the wireless LAN access point and executed.
Select this option to use this machine in both the wired LAN environment and wireless LAN environment.
The main body is used as a wireless LAN access point.
When starting up the main body, perform wireless LAN communication between the main body and the
mobile device (Android device, iOS device, or devices supporting Wi-Fi) without via wireless LAN access
point.
Select this option to use this machine in both the wired LAN environment and wireless LAN environment.
The main body is used as a wireless LAN access point.
With this mode, a mobile device (excluding iOS) can be connected to Wi-Fi Direct authentication devices
easily.
Setting item
• Address: IPv4 or IPv6 address
• Host name: Alphanumeric characters and symbols up to 253 characters
Setting item
Contents
Description
Setting
I-122
I SERVICE MODE > 17. Network Settings
Default setting
Default setting
○
Default setting
○
○
Y119930-3