Olivetti d-Color MF4003 Service Manual page 301

d-Color MF4003/MF3303
Setting item
Control CH Speed A bit speed of the control channel.
The negotiation of 2400/1200 is performed in the V.34 start-up
procedure.
Max. SYMB Speed Maximum modulation speed (baud rate) of V.34
The modulation speed of both sending and receiving change
by change of setting.
The upper limit value of V.34 maximum bit speed is
determined.
Normally you do not need to change the value. In case that a
V.34 error frequently occurs, you can attempt to set up 3000
SYMB and decrease the symbol rate, for instance.
V34 Point Number Select the optimal Eye Pattern in accordance with the line state
obtained from V.34 transmission training.
V17 Send Max Speed
Setting item
TX Max. Speed To set the max. speed for transmission.
RX Max. Speed To set the max. speed for reception.
TxATT
Setting item
PIX TxATT To set the output level of PIX TxATT.
Directly sets modem. There are no external attenuator.
TONE/Procedure Signal To set the output level of TONE/Procedure Signal TxATT.
TxATT Directly sets modem. There are no external attenuator.
CED/ANSam TxATT To set the output level of CED/ANSam TxATT.
Directly sets modem. There are no external attenuator.
DTMF TxATT To set the output level of DTMF TxATT.
Directly sets modem. There are no external attenuator.
Level
Setting item
CD/SED ON Level To set reception signal sensitivity level.
SED is not used.
DTMF H-L Level To set DTMF H-L level difference.
Difference
Cable EQL
Setting item
Send/Rec. To correct the delay characteristics of the communication line.
Y119930-3
Contents
• 3429 SYMB: 3429 33.6 k to 4.8 k
• 3200 SYMB: 3200 31.2 k to 2.4 k
• 3000 SYMB: 3000 28.8 k to 2.4 k
• 2800 SYMB: 2800
• 2400 SYMB: 2400
Contents
Contents
Contents
Contents
1200 bps
2400 bps
2400 SYMB
2800 SYMB
3000 SYMB
3200 SYMB
3429 SYMB
Auto
16Point
4Point
V17-14400 bps
V17-12000bps
V17-9600bps
V17-7200bps
V29-9600bps
V29-7200bps
V27-4800bps
V27-2400bps
V17-14400 bps
V29-9600bps
V27-4800bps
The setting value are different depending on the
country.
-48 to -33 dBm
(Step: 5 dBm)
1.0 to 4.0 dB
(Step: 0.5 dB)
0 Km
1.8 Km
3.6 Km
7.2 Km
I-85
I SERVICE MODE > 16. FAX
Setting value Default setting
Setting value Default setting
Procedure
Setting value Default setting
-48 dBm
2.0 dB
Setting value Default setting
Service Manual
○
○
○
○
○
○