Olivetti d-Color MF4003 Service Manual page 365

d-Color MF4003/MF3303
11. Select [Deactivation] -> [Function Code] or [Deactivation Code], and enter the function code and the deactivation code confirmed at Step9.
<When deactivating with an USB memory>
Connect the USB memory to the USB port on the side of the control panel, and select [Deactivation] -> [USB].
12. Touch [Apply].
13. Write down or print out the serial number and deactivation complete code.
<When deactivating with an USB memory>
MFP will restart automatically. After MFP restarts, write down or print out the serial number and deactivation complete code.
NOTE
▪ When A4S or 8 1/2 x 11S is set to the paper feed tray, the above-mentioned serial number and deactivation complete code
can be printed out by pressing the start key.
▪ Serial number and deactivation complete code can be confirmed in [List] available from [License Management].
Serial Number
Deactivation
Complete Code
14. Touch [Restart].
<When deactivating with an USB memory>
This step is unnecessary. Proceed to the next step.
15. Access to the LMS and login again.
For detail of the login method, refer to step 2 to step 4.
16. Click [Deactivate License Code in LMS].
17. Enter the serial number and the deactivation complete code confirmed at step13.
NOTE
▪ Make sure to enter alphabet letters of the serial number in all capital letters.
Y119930-3
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
0123456789012
01234-56789-01234-56789-01234-56789-01234
Restart
J-11
SETTING
Service Manual