Olivetti d-Color MF4003 Service Manual page 607

d-Color MF4003/MF3303
[3]
[1] Charge neutralizing needle
[3] Transfer belt
(5) 2nd transfer roller new article detection
• The 2nd transfer roller (hereinafter referred to as the "transfer roller") is not provided with any new article detection mechanism. If the
transfer roller is replaced with a new one, therefore, "New Release" must be performed of the "Transfer Roller Unit" in "Counter/ Life" of
the Service Mode.
1.9 TONER COLLECTING SECTION
1.9.1 Configuration
[5]
[4]
[1] Waste toner collecting screw (Imaging unit/ Y,M,C,K)
[3] Waster toner bottle
[5] Waste toner collecting screw (Transfer belt)
1.9.2 Drive
[4]
[3]
Y119930-3
[1]
[2]
[3]
[1]
[2]
P THEORY OF OPERATION > 1. d-Color MF4003/MF3303
[1]
[2]
[2] 2nd transfer roller
- -
[2] Waste toner supply screw (Imaging unit/ K)
[4] Waste toner agitating blade
-
P-33
Service Manual